2.2.1
Insert Diskette
Figure 7 Insert diskette
Step 1
Insert the diskette in the drive slit (s. Figure 7).
Step 2
Push the diskette into the slit until it clicks into place.
If the diskette is inserted incorrectly, it is disabled. In this case do not try to insert
the diskette again. Remove the diskette and insert it correctly.
2.2.2
Remove Diskette
Step 1
Make sure that the LEDs "Disk in Use" are no longer lit.
Step 2
Press the floppy-disk ejection key. The diskette now ejects
a little from the drive slit.
Step 3
Remove the diskette carefully from the drive.
21
Operation
11