Table of Contents
Advertisement
CAUTION!
Using this product with the protection function disabled
may cause damage to itself. Use special care for this point
when using this mode.
• Canceling DIAG
[1] Before canceling DIAG, execute setting for PRESET of
DIAG menu No.9 (Memory initialization inhibited or
Memory initialized).
* In order to keep the user memory stored, be sure to
select PRESET INHIBITED (Memory initialization
inhibited). Protection history will remain memory.
[2] Turn off the power by pressing the "STANDBY/ON"
key of the main unit.
• Display provided when DIAG started
RX-V730/RX-V730RDS: When the monitor is connected,
DIAGNOSTIC MENU appears on its screen as shown in
the figure. (It remains on display until DIAG is cancelled.)
The FL display of the main unit displays the protection
function history data and the version (1 alphabet) and the
DIAG menu [sub-menu (ANALOG BYPASS) of DIAG
menu No.1 DSP THROUGH] a few seconds later.
When there is no history of protection function:
When there is a history of protection function:
Opening message
When there is no history
of protection function
Version (1 alphabet)
After a few seconds
When there is a history of protection
function due to excess current
RX-V730/RX-V730RDS/RX-V630/RX-V630RDS
HTR-5560/HTR-5560RDS/DSP-AX630/DSP-AX630SE
DIAG menu display
Version (1 alphabet)
21
Hide quick links:
Advertisement
Table of Contents
