Manual Sensor Cleaning - Canon EOS 60D Instruction Manual

Manual Sensor CleaningN
3
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
As power source, using the AC Adapter Kit ACK-E6 (sold separately) is
recommended.
If you use a battery, make sure it is fully recharged. If the battery grip with
size-AA/LR6 batteries is attached, manual sensor cleaning will not be
possible.
Select [Sensor cleaning].
1
Under the [6] tab, select [Sensor
cleaning], then press <0>.
Select [Clean manually].
2
Select [Clean manually], then press
<0>.
Select [OK].
3
Select [OK], then press <0>.
In a moment, the reflex mirror will
lockup and the shutter will open.
"CLn" will blink on the LCD panel.
End the cleaning.
4
Set the power switch to <2>.
233