Installing And Removing The Battery - Canon EOS 60D Instruction Manual

Installing and Removing the Battery

Installing the Battery
Load a fully-charged Battery Pack LP-E6 into the camera.
Only the Battery Pack LP-E6 can be used.
Removing the Battery
26
Open the battery compartment
1
cover.
Slide the lever as shown by the arrow
and open the cover.
Insert the battery.
2
Insert the end with the battery
contacts.
Insert the battery until it locks in
place.
Close the cover.
3
Press the cover until it snaps shut.
Open the cover and remove the
battery.
Press the battery release lever as
shown by the arrow and remove the
battery.
To prevent short circuiting of the
battery contacts, be sure to attach the
protective cover to the battery.