Lens Peripheral Illumination Correction
3
Due to the lens characteristics, the four corners of the picture might look
darker. This is called lens light fall-off or drop in peripheral illumination.
The default setting is [Enable].
Without correction
102
Select [Peripheral illumin.
1
correct.].
Under the [1] tab, select
[Peripheral illumin. correct.], then
press <0>.
Set the correction setting.
2
On the screen, check that the
attached lens' [Correction data
available] is displayed.
If [Correction data not available] is
displayed, see "About the Lens
Correction Data" on the next page.
Select [Enable], then press <0>.
Take the picture.
3
The image will be recorded with the
corrected peripheral illumination.
With correction