Display; Connections - Panasonic KX-TG4381NZ Operating Instructions Manual

TG43xxNZ(e)_OI.book Page 12 Tuesday, August 26, 2008 1:58 PM
Preparation

Display

Handset display items
Item Meaning
Battery level
5
Handset number
[1]
Someone is using the
Line in
line.
use

Connections

Connect the AC adaptor cord (A) by
pressing the plug firmly (B). Connect
the telephone line cord until it clicks into
the base unit and telephone line socket
(C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207AL.
L Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
C
To single-line
telephone A
socket
(220-240 V AC,
50/60 Hz)
12
Charger
Available for:
KX-TG4382/KX-TG4392
L Use only the supplied Panasonic AC
adaptor PQLV209AL.
A
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
L The unit is not designed to be used
with rotary/pulse dialling services.
L The unit's answering system will not
answer incoming calls on your
FaxAbility number. (KX-TG4391/
KX-TG4392)
During a power failure
The unit will not work during a power
B failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line socket using a
BT double adaptor.
Hook
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
B
Hooks
(220–240 V AC,
50/60 Hz)