Rear Panel; Mains Socket - t.amp TSA4-700 Owner's Manual

Rear panel

Mains Socket

Please, make sure to check whether the voltage selector shows the correct mains
voltage that matches the local mains supply at the installation site. An appropriate
mains cord is included in the package.
Input
The inputs INPUT A & INPUT B are connect to mixing consoles. The XLR-type
connecting OUTPUT A & OUTPUT B are prepared for through-connecting input
signals to additional external power amp s. The input signal is directly routed to these
output connectors. Accordingly, input and output connectors of the corresponding
channel are interconnected in parallel, offering permanent electrical connection,
INPUT A OUTPUT A
without regard to the setting of the Power-ON switch.
Although having XLR-type output connectors, some mixing console models provide
unbalanced output connection only. when using mixers with unbalanced outputs,
bridging PIN1 and PIN3 of the power amp s input connectors or leaving PIN3 of the
cable s plugs unconnected is necessary. Otherwise, when feeding in unbalanced
audio signals via PIN3 (B,-, cold) and PIN2 (A , + , hot), strange humming and HF-
interference may occur, which very likely will damage the power amplifier and /or the
connected speaker cabinets.
WARNING:
TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE EQUIPMENT TO RAIN OR MOISTURE!
WARNING:
TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE EQUIPMENT TO RAIN OR MOISTURE!
04