Table of Contents
Advertisement
Operation
Short Time Alarm
Using the Symphony's timer, you can
enjoy a short nap or a siesta. Start up the
Symphony as usual and select a music
source. Now using the the timer, you can
define how long it should be before the
Symphony switches itself back on again.
You can choose a time between 10 and
60 minutes. The time shown as Wake-up
time indicates when the Symphony will
switch back on.
Confirm your settings with the OK button.
The following display appears on the
S208 remote control for about 5 seconds
as confirmation: see figure top right.
Then the connection to the receiver is
dropped and the Symphony switches
itself off.
The Status LED on the Symphony shows
permanently red
off if a timer is active.
After the pre-defined time, the Symphony
starts
up
automatically
previously selected source. Now, using
hot keys
Select device
the
or "
establish a connection to the unit. The
Symphony displays the following as a
welcome screen:
Symphony
after being switched
with
the
", you can
63
Advertisement
Table of Contents
