Select Device; Change Zone; Information; Start Pairing - Revox Joy Symphony User Manual

Configuration
 Select device
You select a device that is available in
the remote control and that you want to
control, through this menu. All devices
are listed here, irrespective of whether
they are assigned to a zone or not. The
devices can be Revox Joy Symphonys or
third-party devices that are controlled by
infrared (IR).
Symphonys are added to the device list
through the pairing process.
IR devices are added to the device list
S208 EasyCreator
through the
program.
 Change zone
This menu enables you to change to or
call up another zone. This function can
also be called directly through the
button.
 Information
This menu gives you various details such
as serial number, software states or the
number of integrated devices.
The USB login is also done through this
menu of the S208 is to be configured
S208 EasyCreator
through the
program. For this purpose, a USB
connection (USB Mini <-> USB B) is set
up between the remote control and a PC
running Windows. Then, the red button
is pressed in the Information
menu. This initiates the S208 connection.
If connection is successful, "Connected"
appears in the S208 display.
 Start Pairing
Background information to pairing
A fixed communication must be created
for the bidirectional wireless connection
between the S208 remote control and
the Symphony, in order that they can
communicate securely with each other
again after a restart or power outage.
This is also necessary because there
may be several Symphonys and remote
controls in one system. The exchange of
information for the purpose of uniquely
PC identifying the devices is called Pairing.
An S208 remote control can be deployed
for the control of several Symphonys and
as a result can also be paired with
several Symphonys.
Pairing process
To prepare for the pairing of an S208 and
and Symphony, switch the Symphony off
by unplugging the plug from the mains
and wait until the status LED on the front
panel has gone out. If you now plug in
the cable to the mains again, the LED
flashes green
During this time, you have the chance to
start the pairing process [Start Pairing],
PC
using the OK button. Once a Symphony is
recognised, its name appears in the S208
display. Now the name and the preferred
hotkeys can be selected. This completes
the pairing process.
Symphony
for about 10 seconds.

21