Glossary - FUNAI T3B-N8182DB Owner's Manual

E3B41BD_EN_+nasi.book Page 99 Wednesday, February 7, 2007 6:49 PM

Glossary

Analogue audio
An electrical signal that directly
represents sound. In contrast,
digital audio can also be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative to
its height. Conventional TVs are 4:3
(i.e., the screen is almost square).
Widescreen models are 16:9 (the
screen is almost twice as wide as its
height).
Chapter
Just as a book is split up into
several chapters, a title on a DVD
disc is usually divided into chapters.
See also Title.
CPRM
(Content Protection for
Recordable Media)
CPRM is a scrambling copy
protection system for the protection
of "copy-once" broadcast
programmes (e.g. some satellite
broadcasts).
Digital audio
An indirect representation of sound
using numbers. During recording,
the sound is measured at discrete
intervals (44,100 times a second for
CD audio) by an analogue-to-digital
converter, generating a stream of
numbers. On playback, a digital-to-
analogue converter generates an
analogue signal based on these
numbers. See also Sampling
frequency and Analogue audio.
Dolby Digital
A system developed by Dolby
Laboratories that compresses
digital sound. It works with stereo
(2ch) or multi-channel audio.
DTS
(Digital Theater System)
DTS is a multi channel surround
sound system, but it is different from
Dolby Digital. DTS surround sound
technologies were developed by
DTS, Inc.
Finalise
To make DVDs that have been
recorded playable in DVD players,
finalise DVD-RW / R discs with this
unit.
JPEG
(Joint Photographic Experts
Group)
JPEG is a method of compressing
still image files. You can copy JPEG
files on CD-RW / R discs from a
computer and play back the files on
this unit.
MP3
(MPEG Audio Layer 3)
MP3 is a method of compressing
files. You can copy MP3 files on CD-
RW / R discs from a computer and
play back the files on this unit.
PCM
(Pulse Code Modulation)
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can
play back sounds as realistic as
possible by converting even
compressed Dolby Digital and
MPEG audio to PCM.
99
Playlist
From this list you can play back
contents of a disc in your desired
order or in sequence. It is also
possible to directly search for a
specific scene.
Region code
Regions associate discs and
players with particular areas of the
world. This unit will only play back
discs that have compatible region
codes. You can find the region code
of your unit by looking on the rear
panel. Some discs are compatible
with more than one region (or all
regions).
Sampling frequency
The rate at which sound is
measured by a specified interval to
turn it into digital audio data. The
number of samples in one second is
defined as the sampling frequency.
The higher the rate is, the better the
possible sound quality.
S-Video output
Video is output as the individual
signals of colour(C) and
luminance(Y), so a higher-quality
picture will be displayed.
Title
A collection of chapters on a DVD.
See also Chapter.
Track
Audio CDs use tracks to divide the
contents of a disc. The DVD
equivalent is called a chapter. See
also Chapter.
EN