Manual Tuning - FUNAI T3B-N8182DB Owner's Manual

E3B41BD_EN_+nasi.book Page 19 Wednesday, February 7, 2007 6:49 PM
Auto Tuning
Auto Tuning Now Auto Tuning Now
Wait for a moment. Wait for a moment.
• Wait for several minutes to finish channel
storing.
After Auto Tuning has stopped:
• Use [PROG. / ] or [the Number Buttons] to
change the channel.
• When you use [the Number Buttons], press [0]
first for a single digit number.
• Use [INPUT SELECT] or [PROG.
an external input channel ("AV1", "AV2" or "AV3") of
this unit.
To cancel auto tuning:
Press [RETURN ] during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when either HDD,
DVD or VCR is in any recording mode (normal
recording, One-touch Timer Recording or Timer
Recording).
• Sorting of TV channels from P01 to P06 will be
performed automatically as follows.
P01: BBC1 P02: BBC2
P04: CH4 P05: CH5
* If you are using a satellite receiver, turn it on and
select SKY NEWS before commencing tuning.

Manual Tuning

You can tune each channel and set their properties
manually.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Initial Setting" using
[Cursor
/
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
--/--/--(---) --:--
/ ] to select
P03: ITV
P06: SKY NEWS
], then press [ENTER].
01/01/07(Mon) 19:34
3
Select "Channel Setting" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
4
Select "Manual Tuning" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Auto Tuning
Channel Setting
Manual Tuning
TV Aspect
Move Move
Select Video
Video Out
5
Select the position number of which
you want to change the setting using
[Cursor ], then press [ENTER].
/
Manual Tuning
Pos. Channel Decoder
P01 21 On
P02 45 Off
P03 63 Off
P04 80 Off
P05 88 Off
P06 95 Off
P07 110 Off
P08 2 Off
• You can select position numbers 01 to 99.
• You can jump to the next or the previous page
using [SKIP ] or [SKIP
F
6
Press [Cursor
searching for the available channel.
• Search direction can be switched by pressing
/
[Cursor ].
• If you already know the channel number, you
can directly enter the channel number using
[the Number buttons]. Refer to the following
Channel Plan table and press the three digits to
select the channel number.
(To select channel 4, press [0] first and then
press [0] and [4]. Or press [4]. And when "4"
appears, wait for 2 seconds.)
• If this is the channel you want, press
[Cursor ].
19
01/01/07(Mon) 19:34
01/01/07(Mon) 19:34
01/01/07(Mon) 19:34
Skip Station
Off BBC1
Off ---
Off ---
Off ---
Off ---
Off ---
Off ---
On ---
].
B
] to start
/
EN