Advanced Operations - Bresser SSL E-Mail/MMS 8MP Instruction Manual

3.4.1 Manual use
In TEST mode it is possible to capture pictures or videos
manually by pressing the
Use the button to stop the manual recording.
3.4.2 View images or videos
Press OK to enter image storage. Press
the previous image or
Videos cannot be played on the LCD screen and only
thumbnails of the videos are shown.
Detailed information of operations like deleting images
or videos is described in the section "Advanced Ope-
rations".
3.4.3 Sending messages via MMS or by e-Mail
If the option "Manual" under menu point "Send mode" is
selected, images can be send to the set address. The
settings for "Daily report" and "Instant" under menu point
"Send mode" can only be used in the "ON" mode.
*Not included with your purchase
button on the remote control.
key to view
key for the next. Please note:
3.4.4 Switching off
Turn the power switch to the OFF position to switch the
camera off. Please note that even in the OFF mode, the
camera still consumes certain power at μA level. There-
fore, please remove the batteries if the camera will not
be used for a while.

4. Advanced Operations

We know from the basic operations of the camera in
the previous chapter, that the camera has three basic
operational modes:
1. OFF Mode: Power switch is in OFF position.
2. ON Mode: Power switch is in ON position.
3. TEST Mode: Power switch is in ON position
and the remote control is connec-
ted to the camera.
The OFF mode is a specific safety mode for replacing
the SD-card or batteries and transporting the camera.
DE
15