Functional Description; Product Features; Intended Use - Bosch GBM Professional 350 Original Instructions Manual

OBJ_BUCH-527-004.book Page 6 Monday, May 10, 2010 1:11 PM
6 | English
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for drilling in wood,
metal, ceramic and plastic. Machines with elec-
tronic control and right and left rotation are also
suitable for screwdriving and tapping.
1 619 P08 930 | (10.5.10)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Key type drill chuck
2 Lock-on button for On/Off switch
3 On/Off switch
4 Rotational direction switch(GBM 350 RE)
5 Handle (insulated gripping surface)
6 Chuck key
7 Screwdriver bit*
8 Universal bit holder*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools