Functional Description - Bosch GSR 12 V Operating Instructions Manual

OBJ_BUCH-208-002.book Page 15 Wednesday, September 6, 2006 7:54 AM
Protect the battery against heat, e. g., also
against continuous sun irradiation and fire.
There is danger of explosion.
Do not short-circuit the battery. There is danger
of explosion.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions,
unfold the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal, ceramic
and plastic.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Keyless chuck
2 Torque preselection ring
3 Gear selector
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving
application according to ISO 5393
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Chuck clamping range
Drill spindle thread
Weight according to EPTA-Procedure
01/2003
Technical data determined with 2.0 Ah NiCd battery.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
2 609 140 390 • 6.9.06
4 Soft grip
5 Screwdriver bit*
6 Battery unlocking button
7 Battery*
8 Rotational direction switch
9 On/Off switch
10 Universal bit holder*
11 Securing screw for keyless chuck
12 Allen Key**
*The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN 60745 according to
the provisions
98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
20.07.2006, Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
GSR ... 12 V
PROFESSIONAL
3 601 J95 ... 500
V= 12
rpm 0–400
rpm 0–1400
Nm 34/20
mm 7
mm 10
mm 25
mm 1.5–10 1.5–13 1.5–10 1.5–13 1.5–10
½"
kg 1.8
of the directives 89/336/EEC,
Dr. Eckerhard Strötgen
Head of Product
Certification
12 V 14,4 V 14,4 V
501 400 401
12 14.4 14.4
0–400 0–400 0–400
0–1400 0–1400 0–1400
36/20 38/22 42/22
7 8 8
13 10 13
28 32 35
½" ½" ½"
1.9 1.9 2.0
English | 15
18 V
300
18
0–450
0–1450
44/28
9
11
32
½"
2.1