How To Replace The Airflow Sensor; How To Replace The Panasonic Badge; How To Replace The Gaskets - Panasonic TH-47LFT30W Service Manual

Full hd lcd display

Hide thumbs Also See for TH-47LFT30W:

Table of Contents

Enlarged version

TH-47LFT30W

8.26. How to replace the airflow sen-

sor

Two airflow sensors are placed in the positions shown in the

drawing. Take the following steps to replace the airflow sen-

sors.

1. Remove the cover-fan-side assembly.

2. Undo the screws shown in the drawing to remove the air-

flow sensors together with the holder. (SCR BIN+SW+W

4X10)

3. Undo the screws shown in the drawing to remove the air-

flow sensors. (SCR BIN+SW+W 3X12)

4. Replace them with the replacement airflow sensors.

8.27. How to replace the Panasonic

badge

* The Panasonic badge is attached to the replacement cab-

inet front, but the Panasonic badge itself can be also sup-

plied as a single part. Take the following steps to replace

the Panasonic badge.

1. Detach the Panasonic badge

2. Attach the replacement Panasonic badge to the specified

position on the cabinet front as shown in the drawing.

The gaskets are fitted in the following positions of this unit.

When replacing any parts around them, stick the replacement

gasket together before putting them in place.

Table of Contents