How To Replace The Lcd Panel - Panasonic TH-47LFT30W Service Manual

3. Remove four screws which secure the fan holder and
detach the fan, then replace with the replacement fan.
(SCR BIN+SW+W 4X20)

8.18. How to replace the LCD panel

Carry out the following steps to remove the parts attached to
the LCD panel.
1. Remove the coupler for LVDS cable from the T-CON unit
of the LCD panel.
2. Remove the coupler for the cable from the inverter unit of
the LCD panel (two places).
3. Remove the cap from the side of the cover-fan-side
assembly. The cap is fixed with two tabs. (three on each
side, total of six)
4. Remove six screws (three on each side) which hold the
cover-fan-side assembly
BIN+SW+W 4X10)
5. Remove eight screws (four on each side) which hold the
cover-fan-side assembly from the top. (SCR BIN+SW+W
4X10)
6. Undo eight screws which fix the metal fittings A and B of
the chassis base. (SCR BIN+SW+W 4X10)
27
TH-47LFT30W
from the side. (SCR