System Panel Connector - Asus YNRC-BR User Manual

7. System panel connector (10-1 pin F_PANEL1)
This connector supports several chassis-mounted functions.
YNRC-BR System panel connector
• System power LED (2-pin PWR LED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up
when you turn on the system power, and blinks when the system is in
sleep mode.
• Hard disk drive activity (2-pin HD LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
• Power/Soft-off button (2-pin PWR BTN)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
ASUS P5RC-BR
F_PANEL1
GND
PWR BTN
PWR
PLED-
PWR LED
PLED+
NC
Reset
RESET
Ground
HDLED-
HD LED
HDLED+
17