Installation Mounting Bracket - Furrion FOS48TAPK-BL Operating And Installation Instructions

Installation
Mounting Bracket
(If the FRCBRKT-BL Mounting is pre-installed please go to page 9)
Caution
• Ensure there are no electrical
cables, gas lines, pipes or other im-
portant parts behind where the drill
holes will be.
• During installation, remove the key
from the ignition & isolate the 12v or
24v power source.
Suitable installation position
• Where practical, as high as possible
at the rear of the vehicle.
• In the horizontal centre of the vehi-
cle or as close as.
Vehicle Centre
Vehicle Roof
6
Suitable installation position..
• Mount the camera directly above
the red running lights.
• At least 2" away from any lighting.
Close proximity to lights may cause
image blooming, blurring and re-
duced night vision performance.
• The area should be flat with enough
surface area to accommodate the
bracket.
• The surface area should be clean &
dry for a watertight installation.
• Ensure that power can be fed to
the installation area from within the
vehicle.
Camera
Bracket