Monitor Installation - Furrion FOS48TAPK-BL Operating And Installation Instructions

Positioning the Monitor
• Ensure the the is placed so that it does not obstruct vision when driving.
• Do not place in an area where it might interfere with driving.
• The surface area should be clean, smooth & flat.
With the lock open,
position the mount.
Adjusting the View Angle
• Swivel & Tilt the mount to set the
optimum viewing angle.
• Lock the position by tightening the
locking screws.
Connecting the Monitor
• Route the power cable to the vehicle's cigarette lighter socket/12/24V power
outlet. The cable must not interfere with the safe operation of the vehicle.\
• Insert the small 12/24 Volt DC plug of the power cable into the right side of the
monitor.
• Plug the 12/24 Volt cigarette lighter plug into the vehicle's cigarette lighter
socket.
Press mount down
against the surface.
1
Installation

Monitor Installation

Push the mount lock
down.
1
11