Mounting Installation - Furrion DV1000 Instruction Manual

13

1.8 Mounting Installation

Location
*
Choose a mounting location away from humid areas, water sources, appliances or any
equipment that can radiate heat.
* Select an area on a wall or cabinet which is free from cable, fuel or brake lines and ensure
the area behind the wall mount stereo has a vent hole or if it is an enclosed box and has
adequate room around the rear of the unit for cooling.
* Ensure when the stereo is mounted in the cut out that the wires at the rear of the unit are not
pressed against the heat sink
Mounting Opening
* Refer to following mounting hole diagram,measure and cut a mounting area.
3.31 0.005
1.32 0.02
* Where possible leave around 1 to 2 inches of space inside the cabinet around the sides and
rear of the stereo housing to help with airflow and ventilation.
Installing the unit.
* Before finally installing the unit, connect the wiring temporarily and make sure
the unit and the system work properly.
*Fix the unit with screw according to following diagram.
5.94 0.005
MOUNTING SCREWS
M3 22
-
PLASTIC FRAME
5.5 Playback from a specified chapter/track or a specified time
1. When playing DVD discs, press the SEARCH button to display a interface
and highlight the title item, then use the number buttons to input the serial
number of the title; use the direction buttons to highlight the chapter item,
then use the number buttons to input the serial number of the chapter; finally
press the OK or PLAY button to play the selected chapter.
2. When playing VCD/MP3/WMA/CD discs, press the SEARCH button to display
a interface and highlight the track item, then use the number buttons to input
the serial number of the track; finally press the OK or PLAY button to play the
selected track .
5.6 Playback in Random
When playing DVD/VCD(PBC OFF)/MP3/WMA/CD discs, press the RDM
button to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM
(ON) mode, it will play in random.
5.7 Playback in Different Angle
1. When playing VCD/MP3/WMA/CD discs, the ANGLE button on the IR remote
control is not available.
2. When playing DVD discs, press the ANGLE button repeatedly on the IR
remote control to view in different angle.(This function is only for the DVD
discs with ANGLE function)
5.8 Playback in Zoom Mode
In DVD/VCD mode, during playback, press the ZOOM button continuously
to enlarge a certain area of the images on the screen with these multiples:
22