Delfi DelfiScan C70 Programming Manual page 7

Program & End
Please note that the DelfiScan will take 3-4 seconds to store parameters in internal Flash Memory ASIC or non-volatile
memory after you scan the "END". Please don't turn off the power before the completion beeping. It may destroy all
configured parameters.
System List, Group & Master Default
Scan
"PROGRAM"
DelfiScan will enter programming mode,
and inhibit all non-programming functions.
Scan
"END"
DelfiScan will exit programming mode, and store all
parameters in Flash Memory ASIC or non-volatile memory,
then issue the completion beeping.
Scan
"SYSLIST"
DelfiScan will list the product information and
revision number to host via selected host interface,
then issue the completion beeping.
Scan
" M_DEFAULT "
DelfiScan will recover all programmable
parameters into factory preset configurations,
then issue the completion beeping.
7