Condensed Datawizard - Delfi DelfiScan C70 Programming Manual

Condensed DataWizard

PROGRAM
Family Code Selection
Preamble
Postamble
Data Length Transmission
Symbology ID
Transmission
DataWizard is the most powerful, Artificial-Intelligence based data editing expert system provided specially for the
DelfiScan family bar code readers. Through DataWizard, you can process the scanned data prior the transmissions in
many ways as: Insert, Delete, Match, Verify, Replace, Reorganize, and Repeat Transmission. It will help you to
arrange the transmission of scanned data to any specific format without software modification.
Due to the resources used by this system, Full-feature DataWizard is only supported by PowerTool. Through the
PowerTool, all settings and configurations can be done on-screen, under Windows 95/98/NT/2000/XP environment.
A Condensed Version DataWizard is provided by each DelfiScan series. Through this menu, the condensed
DataWizard can be utilized via bar code menu readings with ease.
Please note that all "Character" input should be referred to the ASCII/HEX Table listed in Appendix to find matched
HEX value.
If you have any problem to use DataWizard, please refer to following pages for details and consult your local DelfiScan
vendor or our web site for any assistance.
Preamble, Postamble, Data Length & Symbol ID
P.C Parameter Selection
SS None
1-15 characters
MS
Maximum 15-character input; scan "FIN" to terminate this
selection.
SS None
1-15 characters
MS
Maximum 15-character input; scan "FIN" to terminate this
selection.
SS Disable
SS Enable 2 digits data length transmission
If data length exceeds 99, 3-digit data length will be
transmitted.
SS Disable symbology ID transmission
SS Enable prefix symbology ID transmission
SS Enable suffix symbology ID transmission
SS Enable both prefix and suffix symbology ID transmission
Trans.
M DEFAULT
Option Code
FIN
[00-7f], [FIN]
FIN
[00-7f], [FIN]
0
1
0
1
2
3
37