Advanced Hookups - Sony SLV-D100 Service Manual

QQ
3 7 63 1515 0
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x STOP.
Daily/weekly recording
In step 4 above, press v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press V to change the indication in reverse order.
MO~FR t SUN'S t MON'S t ..... t SAT'S t 1 month later t (dates count
down) t the current date
To use the Auto Tape Speed function
When you are recording a program in the AUTO mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the EP mode. Note that some noise will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, select SP. To operate this function, set
"Tape Length" in "VIDEO FUNCTION SETUP" menu correctly (page 84).
To watch another TV program after setting the timer
1
Press TV/VIDEO to display "TV" in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV's antenna input; if not, skip this step.
3
Select another channel on the TV.
To watch a DVD after setting the timer
1
Press SELECT DVD to control the DVD player.
Press Z and place the disc on the disc tray.
2
Press H PLAY.
3
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
Tips
• To set the channel, you can also use the V/v or number buttons.
• If the indicator appears, the timer settings overlap. To check, change or cancel the program
setting, repeat the steps of "Recording TV programs using the timer" on page 40.
• If the indicator appears, this means that the VCR is currently recording this program.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 36).
– Display tape information on the TV screen (page 38).
TE
L 13942296513
42
Recording TV programs using the timer
Press V/v/B/b to select
2
• If you want to change a setting, go on to the next step.
ENTER
• If you do not need to change the settings, press O RETURN repeatedly
to exit the menu, then turn off the VCR to return to recording standby.
RETURN
Press V/v to select setting you want to change
3
or cancel.
ENTER
• To change the setting, press B/b to flash the
item you want to change, and press V/v to
change it.
CLEAR
• To cancel the setting, press CLEAR.
Press O RETURN to confirm the setting.
4
The indicator appears in the display window.
RETURN
Press O RETURN repeatedly to exit the menu.
5
The DVD-VCR stands by for recording (you do not have to turn off the
RETURN
DVD-VCR). When using a cable box, leave it on.
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
Program 1
Program 2
www
.
44
Checking/changing/canceling timer settings
http://www.xiaoyu163.com
"Set Timer Recording", then press ENTER.
CH START STOP DATE
B 3 5 8 : 0 0 9 : 0 0 9 / 3 0 SP
P M P M
2 0 10 : 0 0 11 : 3 0 10 / 0
A M A M
6 0 8 : 3 0 10 : 0 0 9 / 3
P M P M
– – – : – – – : – – – – –
– – – : – – – : – – – – –
– – – : – – – : – – – – –
– – – : – – – : – – – – –
– – – : – – – : – – – – –
V v B b
RETURN
Will be cut off
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Checking/changing/canceling timer
settings
1
SET UP
Q Q
3 6 7 1 3

Advanced Hookups

A/V Receiver hookup
A Use this hookup if your A/V receiver has a Dolby* Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
∗ Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-
D symbol are trademarks of Dolby Laboratories.
SPD
2 EP
0 AUTO
--
--
--
--
--
A
VIDEO AUDIO
R
LINE IN1
LINE OUT
to LINE OUT L/R (AUDIO)
l: Signal flow
Rear (L)
Note
• When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear
.
speakers and a subwoofer.
1-9
9 4 2 8
Press SET UP when the DVD player is in stop
mode.
The "SETUP MENU" appears.
You can also use the TIMER button in VIDEO
mode, then you can skip step2.
1 5 0 5 8 2 9 9 4
Checking/changing/canceling timer settings
DVD-VCR
Stereo audio cord
(not supplied)
L (red)
(white)
(white) (red)
to audio input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (R)
m
Subwoofer Center Rear (mono)
co
9 9
?/1
CLEAR
SET UP
TIMER
V/v/B/b
ENTER
O RETURN
SETUP MENU
DVD Setup
Vv b B
RETURN ENTER
2 8 9 9
continued
43
[Speakers]
Front (L) Front (R)
continued
45
A/V Receiver hookup