Adjusting The Picture; Editing With Another Vcr; Changing Menu Options - Sony SLV-D100 Service Manual

QQ
3 7 63 1515 0
To search for the counter 0:00:00 point
To mark a point on the tape that you want to find later, reset the tape counter to
"0:00:00."
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
1 Press SEARCH MENU.
Press V.
2
The VCR starts searching and automatically stops at
the 0:00:00 point.
To search for a blank portion of the tape
The VCR automatically searches for the beginning of a blank portion. You can easily
find a point you can start recording from.
1
Press SEARCH MENU.
Press v.
2
The VCR starts searching and automatically stops at
the beginning of a blank space. If no blank space is
found, the VCR reaches the end and the tape will be
ejected.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
TE
L 13942296513
82
Searching using various functions

Changing menu options

1
Press SET UP when the DVD player is in stop
mode.
2
Press V/v/B/b to select
Setup), then press ENTER.
The "VIDEO FUNCTION SETUP" menu appears.
Press V/v to select the option to change.
3
Press B/b to change the setting.
4
Press O RETURN repeatedly to exit the menu.
5
Menu choices
The default settings are indicated in bold print.
Menu option
Tape Length
Auto Play
Auto Repeat
www
.
84
Changing menu options
http://www.xiaoyu163.com
Go to [ 0 0 0 : : 0 0
0 0 1 3 0 : :
End search
0 0 1 3 0 : :
SETUP MENU
DVD Setup
Vv b B
RETURN ENTER
(Video Function VIDEO FUNCTION SETUP
B b
Tape Length T120
Auto Play On
Auto Repeat Off
V v
RETURN
Set this option to
• T-120 when using a T-120 or shorter length tape.
• T-160 when using a T-160 length tape.
• T-180 when using a T-180 or longer length tape.
• On to start playback automatically, when you insert a tape with
its safety tab removed.
• Off to turn off Auto play. You need to press H PLAY to start
playback, even if you insert a tape with its safety tab removed.
• On to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
• Off to turn off Auto repeat.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8

Adjusting the picture

Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
Press TRACKING +/– to display the tracking meter.
The distortion should disappear as you press one of
the two tracking buttons.
]
To resume automatic tracking adjustment, eject the
tape and reinsert it.
Note
• The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP
mode on other VCRs.
Q Q
3 6 7 1 3

Editing with another VCR

How to connect to record on this VCR
Notes
• Make sure you connect the plugs to jacks of the same color.
• If the other VCR is a monaural type and connected to this VCR's LINE-2 IN jacks, connect
the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right
channel.
• If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound
is recorded only on the channel whose jack is connected to the audio plug. To record on both
right and left channels, connect the audio plugs to the AUDIO R/L jacks using a VMC-
910MS audio/video cord (not supplied).
.
1-19
9 4 2 8
(tracking)
TRACKING
1 5 0 5 8 2 9 9 4
Adjusting the picture (tracking)
This VCR (Recorder)
LINE-2 IN
LINE OUT
Audio/video cord (not supplied)
: Signal flow
m
co
Editing with another VCR
9 9
Tracking meter
2 8 9 9
83
TV
Other VCR (Player)
continued
85