Table of Contents
Advertisement
Checking/changing/cancelling timer
settings
Before you start...
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
VCR (page 9).
• When using a satellite or digital tuner, turn
it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1
Press SET UP, then press V/v to select
SET UP
The timer programming menu appears.
ENTER
2
Press V/v to select setting you want to change
or cancel.
ENTER
• To change the setting, press B/b to select
the item you want to change, and press V/v
to change it.
CLEAR
• To cancel the setting, press CLEAR.
52
Checking/changing/cancelling timer settings
Advanced Hookups
A/V Receiver hookup
A Use this hookup if your A/V receiver has a Dolby* Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-
D symbol are trademarks of Dolby Laboratories.
DVD-VCR
A
(red)
l: Signal flow
to audio input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L)
Rear (R)
Subwoofer
Centre
54
A/V Receiver hookup
CLEAR
SET UP
V/v/B/b
ENTER
(TIMER) and press ENTER.
PR DATE
START STOP
SPEED
3 5
MO 30
2
0 :0 0 1 : 0 0
2
SP
2 0
WE 02
2
2
: 0 0
2
3
: 3 0
LP
6 0
TU 30
2
0
:3 0
2
2
: 0 0
Auto
V
v
B
b
ENTER
SET UP
PR DATE
START STOP
SPEED
3 5
MO 30
2
0 :0 0 1 : 0 0
2
SP
2 0
WE 02
2
2
: 0 0
2
3
: 3 0
LP
6 0
TU 30
2
0
:3 0
2
2
: 0 0
Auto
V
v
B
b
ENTER
CLEAR
SET UP
to OUT AUDIO L/R
(white)
Stereo audio cord (supplied)
(red)
(white)
[Speakers]
Front (L)
Front (R)
3
Press ENTER to confirm the setting.
ENTER
4
Press ENTER to confirm all settings.
If any settings remain, turn off the VCR to return to recording standby.
ENTER
To record from a satellite or digital tuner, or other source, leave the
connected equipment switched on.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Programme 1
Programme 2
Programme 1
Programme 2
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
.
B-2
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
B-1
to OUT AUDIO L/R
(red)
Stereo audio cord
(supplied)
l: Signal flow
to audio input
[Speakers]
Rear (L)
Subwoofer
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 58). If your AV amplifier (receiver) has
an MPEG audio decoder function, set "MPEG" to "MPEG" in "AUDIO SETUP" menu
(page 58). Otherwise, no sound or a loud noise will come from the speakers.
1-12
about 20 seconds
will be cut off
about 20 seconds will be cut off
Checking/changing/cancelling timer settings
B-2
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
(white)
and
or
Optical digital cord
Coaxial digital
cord (not supplied)
(not supplied)
Remove jack cap
before connecting
(red)
(white)
to coaxial or optical
digital input
[Speakers]
AV amplifier (receiver) having a decoder
Front (L)
Front (R)
A/V Receiver hookup
53
and
B-1
Centre
55
Hide quick links:
Advertisement
Table of Contents
