Lenovo ThinkServer TD230 Hardware Maintenance Manual page 113

Machine types: 1027, 1029, 1039, and 1040
Table of Contents

Advertisement

5. The rear fan is attached to the chassis by four rubber mounts. Remove the rear fan by cutting the rubber
mounts and gently pulling the rear fan out of the chassis.
Figure 71. Removing the rear fan
6. If you are instructed to return the removed rear fan to the manufacturer, follow all packaging instructions
and use any packaging materials that are supplied to you for shipping.
7. To install the rear fan, see "Installing the rear fan" on page 107.
Installing the rear fan
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
"Guidelines" on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to install the rear fan.
.
Chapter 5
Replacing FRUs
107

Advertisement

Table of Contents
loading

Table of Contents