Mounting the Camera in the Housing
CAUTION
Make sure to remove the eyecup from
the camera. If used with the eyecup
in place, it could cause flooding.
Remove the strap or the LCD monitor
cover from the camera, if any of these
accessories are attached.
1
Rotate the quick lock in the
OPEN direction (
then remove the quick shoe
from the front case (
2
Using the included attachment
tool, fix the quick shoe to the
camera's tripod socket
3
Attach the lens to the camera,
and then set the focus mode
(AF or MF)
4
Make sure the quick lock is in
the OPEN position
5
Align the quick shoe with the
quick shoe base, and slide the
camera fully forward into the
front case
To prevent focus/zoom control
inside front case from obstructing
the lens gear, slide the camera into
place as you pull the focus/zoom
dial outward.
E-13
), and
)
Pull the focus/zoom dial outwards.
Fixing screw