Mounting The Camera In The Housing - Sea&Sea MDX-a7 II Instruction Manual

Mounting the Camera in the Housing

CAUTION
Make sure to remove the eyecup from
the camera. If used with the eyecup
in place, it could cause flooding.
Remove the strap or the LCD monitor
cover from the camera, if any of these
accessories are attached.
1
Rotate the quick lock in the
OPEN direction (
remove the quick shoe from
the front case (
2
Using the included attachment
tool, fix the quick shoe to the
camera's tripod socket
3
Attach the lens to the camera,
and then set the focus mode
(AF or MF)
4
Make sure the quick lock is in
the OPEN position
5
Align the quick shoe with the
quick shoe base, and slide the
camera fully forward into the
front case
CAUTION
To prevent focus/zoom control
inside front case from obstructing
the lens gear, slide the camera into
place as you pull the focus/zoom
dial outward.
E-13
), and then
)
Pull the focus/zoom dial outwards.
Place in the correct position and turn the lock
Fixing screw