Nimh/Nicd Battery Program; Charging Of Nimh/Nicd Battery; Charging Nimh/Nicd Battery In The Auto Charge Mode - Ultra Power UP200AC DUO Instruction Manual

PB BATTERY PROGRAM
Elapsed
Battery
time
type
Discharge
current

NIMH/NICD BATTERY PROGRAM

CHARGING OF NIMH/NICD BATTERY

NiMH CHARGE
CURRENT
Battery
type DEC. INC.
Batt type Start
Stop Enter
Battery
Elapsed
voltage
Battery
time
Charge
type
current

CHARGING NIMH/NICD BATTERY IN THE AUTO CHARGE MODE

In this program the charger detects the condition of the battery which is
connected to the output and automatically charges the battery. In this
mode, you should set up the upper limit of the charge current to avoid
damage by excessive feeding current. Some batteries of low resistance
and capacity can lead to higher current in the auto charging mode.
N i M H A u t o C H A R G E
C U R R E N T
Battery
type
Batt type Start
Stop Enter
The screen display the real-time discharging
status. Press START/ENTER button to change
the discharging value. Press START/ ENTER
Battery
button again to store the parameter value you
voltage
set. Press BATT TYPE/STOP button to end
Discharged
capacity
the program.
This program is for charging and discharging
of NiMH/NiCD batteries associated with R/C
2.0A
models applications. You can press Inc. or
- +
Dec. button to change the parameter value,
press START/ENTER button to store the
>3 seconds
value.
The screen displays the real-time charging
status. Press BATT TYPE/STOP button to
stop the process. The audible sound indicate
Charged
capacity
the end of process.
The program is for charging of NiMH/NiCD
batteries in auto mode.
2 . 0 A
You can make it blink in the current field
and press INC. or DEC. to switch mode.
>3 seconds
20