Removing The Pci Adapter - Lenovo ThinkCentre 7096 Hardware Installation Manual

3. In some models, you might have to remove the PCI adapters to gain access to
Figure 7. Removing the PCI adapter
4. Using the blue handle 1 , lift and slide the drive bay assembly forward until
Figure 8. Removing the drive bay assembly
system board components.
the locating studs in the drive bay assembly are aligned with the slots on the
sides of the chassis. Pull upward on the handle to remove the drive bay
assembly completely from the chassis. Depending on what component of the
computer you want to remove, you can either disconnect the cables from the
rear of the drives or leave them connected.
Chapter 3. Installing options and replacing hardware
11