Locations; Locating Controls And Connectors On The Front Of Your Computer; Controls And Connectors - Lenovo ThinkCentre 7096 Hardware Installation Manual

v Always handle parts and other computer components carefully. Handle
v Prevent others from touching the parts and other computer components.
v Before you replace a new part, touch the static-protective package containing the
v When possible, remove the new part from the static-protective packaging, and
v Do not place the part on the computer cover or other metal surface.

Locations

This chapter provides illustrations to help locate the various connectors, controls
and components of the computer. To remove the computer cover, see "Removing
the cover" on page 9.
Locating controls and connectors on the front of your
computer
Figure 1 shows the location of connectors on the front of the computer.
Figure 1. Controls and connectors
4
Hardware Installation and Replacement Guide
adapters, memory modules, system boards, and microprocessors by the edges.
Never touch any exposed circuitry.
part to a metal expansion-slot cover or other unpainted metal surface on the
computer for at least two seconds. This reduces static electricity in the package
and your body.
install it directly in the computer without setting the part down. When this is
not possible, place the static-protective package that the part came in on a
smooth, level surface and place the part on it.
1
USB connector
2
Headphone connector
3
Microphone connector
4
USB connector