2-4-19 Ass'y Lever Unit Pinch, Plate Joint,
Spring Pinch Drive Removal
1) Lift the Ass'y Unit Pinch 1.
2) Remove the Plate Joint 2 from Lever Pinch Drive.
3) Remove the Spring Pinch Drive 3.
Note:
1) Take extreme care not to touch the grease on the Roller Pinch.
2) When reinstalling, be sure to apply grease on the post pinch
roller.
1 ASS'Y LEVER
UNIT PINCH
2 PLATE JOINT
3 SPRING PINCH
DRIVE
Fig. 2-32 Ass'y Lever Unit Pinch, Plate Joint,
Spring Pinch Drive Removal
2-4-20 Ass'y Lever #9 Guide Removal
1) Remove the Spring #9 Guide 1.
2) Lift the Ass'y Spring #9 Guide 2 in the direction of arrow "A".
Note:
1) Take extreme care not to get grease on the tape Guide Post.
2) After reinstalling, check the bottom side of the Post #9 Guide to
the top side of Main Base.
1 SPRING #9 GUIDE
Fig. 2-33 Ass'y Lever #9 Guide Removal
2-16
"A"
2 ASS'Y LEVER #9 GUIDE
"B"