Virtual Surround Setting; Playing An Mp3 Audio Track - Sony SLV-D370P Service Manual

Notes
• To enjoy Dolby Digital or DTS effect from a LinearPCM format disc, you have to make the
connection using DIGITAL AUDIO OUT (COAXIAL) (page 32).
• When you play a DVD with DTS sound tracks, set "DTS" to "On" in "AUDIO SETUP"
menu (page 54).
• If you set DTS audio output, you cannot select surround setting (page 76).
• You cannot perform playback quickly or slowly with sound when DTS audio output is set
(page 37).
To cancel the setting
Select "Off" in step 2.
Notes
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (COAXIAL) jack and set "Dolby Digital" to "Dolby
Digital" or "DTS" to "On" in "AUDIO SETUP" menu (page 54), sound will come from your
speakers but it will not have the surround effect.
• You cannot perform playback quickly or slowly with sound when a virtual surround effect is
set (page 37).

Virtual surround setting

When you connect a stereo TV or 2 front
speakers, SURROUND lets you enjoy surround
sound effects by using sound imaging to create
virtual rear speakers from the sound of the front
speakers without using actual rear speakers.
1
2
75 US 76 US
Changing the sound Virtual surround setting

Playing an MP3 audio track

You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) or DATA DVDs (DVD-
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs) recorded in MP3 (MPEG1 Audio
Layer 3) format.
Before you start...
• Set TV / DVD·VIDEO switch to
1
2
US US
77 78
Virtual surround setting Playing an MP3 audio track
1-18
Press SURROUND during playback.
Press B/b repeatedly to select "Surround1," "Surround2," "Surround3."
Surround effect increases as shown below.
Surround1 Surround2
TV
DVD·VIDEO on the remote.
Press SELECT DVD to control the DVD player.
Press Z and place a DATA CD or DATA DVD
on the disc tray, then press Z to close the tray.
When you load a DATA CD or DATA DVD
which contains MP3 audio tracks and JPEG
image files, "Select a Media Type" menu
appears.
If you load a DATA CD or DATA DVD which
contains only MP3 audio files, the MP3 display appears. Then you can skip
step 3.
SURROUND
B/b
Surround3
TV TV
: Virtual speaker
Z
SELECT DVD
REPEAT
H PLAY
x STOP
V/v/B/b
ENTER
O RETURN
TOP MENU