Dvd Settings And Adjustments; Audio Setup - Sony SLV-D370P Service Manual

Checking/changing/canceling timer
settings
Before you start...
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
When using a cable box or a decoder, turn
it on.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1 Press SELECT VIDEO to control the VCR.
2
Press TIMER.
The timer programming menu appears.
Locking the DVD-VCR
After you have set the timer, you can lock all
of the buttons on the DVD-VCR so that the
settings are not canceled by mistake.
To lock the DVD-VCR
When the DVD-VCR is turned on, hold down ?/1 POWER on the unit until "LOCK"
appears in the display window. The DVD-VCR turns off and the
lit if there is a timer setting. The DVD-VCR will not work except for timer
recordings.
To unlock the DVD-VCR
Hold down ?/1 POWER on the unit until "LOCK" disappears from the display
window. The DVD-VCR is unlocked and turns on.
To stop timer recording while the DVD-VCR is locked, press x. The recording stops
and the DVD-VCR is unlocked.
Note
• The DVD-VCR will be unlocked when:
x
– You stop timer recording by pressing
– You insert a tape.
– The AC power cord is disconnected or power supply stops.
SELECT VIDEO
CLEAR
TIMER
V/v/B/b
ENTER
O RETURN
continued
51
Checking/changing/canceling timer settings
(Child Lock)
?/1 POWER
indicator remains
.
53
Locking the DVD-VCR (Child Lock)
Press V/v to select setting you want to change
3
or cancel.
• To change the setting, press B/b to select
the item you want to change, and press V/v
to change it.
• To cancel the setting, press CLEAR.
Press O RETURN to confirm the setting.
4
Press O RETURN again to exit the menu.
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
Program 1
Program 2
Program 1
Program 2
Tips
• If the indicator appears, the timer settings overlap.
• You can also display the timer programming menu by first pressing SET UP, then V/v to
select (PROGRAM) and pressing ENTER in step 2.
US US
52
Checking/changing/canceling timer settings

DVD Settings and Adjustments

Audio Setup

"Audio Setup" allows you to set the sound
according to the playback and connection
conditions.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
1
Press SET UP when the DVD player is in stop
mode, then press V/v to select
then press ENTER.
Press V/v to select "Audio Setup," then press
2
ENTER.
Press V/v to select the setup item from the displayed list:
3
"Dolby Digital," "DTS" or "Audio DRC."
US US
54
Audio Setup
1-12
about 20 seconds
will be cut off
about 20 seconds will be cut off
SET UP
V/v/B/b
ENTER
(DVD),