Advanced Hookups - Sony SLV-D370P Service Manual

Press V/v to select "Channel Setup", then
2
press ENTER.
The "CHANNEL SETUP" menu appears.
Press V/v to select "Ant/Cable."
3
4 • To preset cable TV channels:
/
B b
Press to select "Cable TV."
• To preset VHF and UHF channels:
/
B b
Press to select "Antenna."
Press V/v to select "Auto Channel Memory,"
5
then press ENTER.
All receivable channels are preset in numerical
sequence. When no more receivable channels
can be found, presetting stops and the picture
from the lowest numbered channel is displayed
on the TV screen.
Press V/v to select "Channel Add/Delete," then press ENTER.
3
4 To preset/disable a channel:
1
Press CH +/– or number buttons to enter
the channel number.
Press B/b to select "ADD" (in memory)
2
or "DELETE" (deleted).
3
Press ENTER.
Press O RETURN to confirm the setting.
5
6
Press SET UP to exit the menu.
Note
• If you have not preset channels automatically, you cannot preset/disable channels manually.
Before you start...
• Turn on the DVD-VCR and your TV.
• Set the TV to video input so that the signal
• Set TV / DVD·VIDEO switch to
• If the DVD player is in play mode, you
1
2
continued
27 US 28 US
Presetting channels

Advanced Hookups

S-Video/Component Video hookup
Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). You can enjoy higher quality images when playing DVDs.
Channel to be preset
Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/Component
Video hookup. See page 32 for audio connections.
If your TV accepts progressive (480p) format signals, you must use the connection B.
Channel to be disabled
US US
29 30
Presetting channels
1-6
Presetting/disabling channels manually
When using a cable box, turn it on.
from the player appears on the TV screen.
DVD·VIDEO on the remote.
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
Press V/v to select "Channel Setup", then
press ENTER.
The "CHANNEL SETUP" menu appears.
Presetting channels
to COMPONENT
VIDEO OUT
(blue) (red) (green)
S-VIDEO cord
(not supplied)
TV
Component video cord
(not supplied)
(green)
(red)
(blue)
l : Signal flow
(DVD only)
S-Video/Component Video hookup
CH +/–
Number
buttons
SET UP
V/v/B/b
ENTER
O RETURN
DVD-VCR
to S-VIDEO OUT
TV