Model Name Setting Method When Engine Is Replaced - Sony RDR-HX950 Service Manual

RDR-GX350/HX750/HX950

3. MODEL NAME SETTING METHOD WHEN ENGINE IS REPLACED

Required equipment:
• Remote controller (RMT-D245A/D245P/D246A/D246P)
• Service remote controller (J-6090-203-A)
• Monitor
Model name delete method
1. Turn the main POWER ON.
2. Press the following buttons on the service remote controller in this order.:
"ESC" k "CHAP" k "1"
* Confirm that the above operation is performed in the state that the screen has exited all settings such as "Home Menu" or "Simple Setting".
3. Turn the main POWER OFF.
4. Turn the main POWER ON. (The screen as shown in Fig. 1 appears.)
5. Select "2" on the screen by using the service remote controller.
* If "1" is selected on the screen, the machine will not work at all. Be sure to select "2".
6. Find out the tentative model name from the Correspondence Table (Table 1) for the client machine. Then, enter the 4-digit "Input No." on the
screen using the service remote controller.
7. The model name setting method is complete. (Screen disappears.)
* Upon completion of the model name setting, be sure to press both "ENTER" and "3" simultaneously on the service remote controller
without fail. It sets the remote control code "3".
Table1 Correspondence table between tentative model name and final product name
Model name
AR
RDR-GX350 MRX-1610/E32
RDR-HX750 —
RDR-HX950 —
All manuals and user guides at all-guides.com
Fig.1 S-company/P-company selection
[Recorder's Model Setting]
Input the number using the remote for Service
> ?
Input No. Manufacturer
[ 1 : P
[ 2 : S
Tentative model name
AUS BR
MRX-1605/AU2 MRX-1610/BR4
MRX-1630/AU2 —
MRX-1650/AU2 —
– 6 –
]
]
CND E
MRX-1610/CA2 MRX-1610/E32
MRX-1640CA2 MRX-1640/E32
— —
SP TW
MRX-1610/SP7 —
MRX-1630/SP7 MRX-1640/TW1
MRX-1650/SP7 —