The Modules; Example - Dynacord V-Systems Modules - Dynacord X1201 Owner's Manual

The modules

A wide variety of rear and front panel modules are available. Here, we cannot provide a listing of all
modules, since the X-Amp system, because of its open architecture, is continuously expanded, as a
reaction to the changing demands and requirements. Please contact your local dealer to get an updated
list of modules. As example, the following figures show some front modules for the DYNACORD
V-Systems. These are cabinet-pertinent modules which in response and dynamic capacity optimally
match the corresponding loudspeaker system. Thus, it is extremely easy to create optimally tuned,
high-quality multi-way systems, that are truly unique in audio performance, controllability and configura-
tion. The Xm-modules are simply inserted into the frontal module slots of the X-Amps. The inserted
modules take over the control of all connected system components.
Additional adjustments are not necessary.

Example - DYNACORD V-Systems modules

Xm-12
Xm-15
Xm-18
0
- 3
2
- 6
-12
4
-24
+ 6dB
LEVEL INPUT
Xm-18
SUBWOOFER V 1 8 PWH
80Hz 160Hz
TBC
160Hz
80Hz
MUTE LO-PASS-FREQUENCY
15
X-Amp SYSTEM
Xm-14
Xm-17
Xm-2