General Description - Subaru LEGACY 2001 Service Manual

Rear Suspension

1. General Description

A: SPECIFICATIONS
Item
Camber (tolerance: ±0°45')
Toe-in
Wheel arch height
+12 +0.47
[tolerance: / mm (
−24
Thrust angle
2.0 L Wagon model
Diameter of stabilizer
Except 2.0 L Wagon model
NOTE:
¼ Front and rear toe-ins and front camber can be
adjusted. If toe-in or camber tolerance exceeds
specifications, adjust toe-in and camber to the
middle value of specification.
¼ The other items indicated in the specification
table cannot be adjusted. If the other items
exceeds specifications, check suspension parts
and connections for deformities; replace with new
ones as required.
(1) Front
A − B = Positive: Toe-in, Negative: Toe-out
α1, α2: Each toe-in angle
GENERAL DESCRIPTION
S201001
S201001E49
/ in)]
−0.94
B4M2250C
Sedan
−0°30'
0±3 mm (0±0.12 in)
Each toe-in angle: ±0°15'
371 mm
(14.61 in) (15.00 in)
15 mm (0.59 in)
14 mm (0.55 in)
RS-2
Wagon OUTBACK
−0°20' −0°10'
381 mm 421 mm
(16.57 in)
0°±30'