Subaru LEGACY 2001 Service Manual page 29

B: INSTALLATION
Install in the reverse order of removal, observing
the following instructions.
CAUTION:
¼ Using transmission jack, support rear arm
horizontally, install link rear and tighten nuts to
specified torque.
(1) Rear arm
(2) Transmission jack
¼ Tighten nut when installing adjusting bolt.
¼ Replace self-locking nut.
NOTE:
Check wheel alignment and adjust if necessary.
C: DISASSEMBLY
Using ST-A, B, press bushing out of place.
ST-A, B 20099AE000 INSTALLER &
LINK REAR
S201102A11
B4M1806B
S201102A06
REMOVER
B4M1854B
D: ASSEMBLY
Using ST, press bushing into place.
ST-A, B 20099AE000 INSTALLER &
E: INSPECTION
Visually check link rear for damage or bends.
RS-27
Rear Suspension
S201102A02
REMOVER
B4M1854B
S201102A10