Subaru LEGACY 2001 Service Manual page 11

1. WHEEL ARCH HEIGHT
1) Adjust tire pressure to specifications.
2) Set vehicle under "curb weight" conditions. (Empty luggage compartment, install spare tire, jack, ser-
vice tools, and top up fuel tank.)
3) Set steering wheel in a wheel-forward position.
4) Suspend thread from wheel arch (point "A" in figure below) to determine a point directly above center
of spindle.
5) Measure distance between measuring point "A" and center of spindle.
Model Specified wheel arch height
+12
Sedan 371
+12
Wagon 381
+12
OUTBACK 421
WHEEL ALIGNMENT
S201116A1001
+0.47
/ mm (14.61 / in)
−24 −0.94
+0.47
/ mm (15.00 / in)
−24 −0.94
+0.47
/ mm (16.57 / in)
−24 −0.94
RS-9
Rear Suspension
B4M1783A