Header/Trailer; Header And Trailer - JARLTECH 2008 Operation Manual

Header and Trailer

Any desired header or trailer may be
programmed into the CCD scanner.
The header/trailer will be automati-
cally attached to the start/end of the
code transmitted. The maximum
length is ten digits.
The pre-set default value is for no
header nor trailer. If you wish to
program these parameters, you must
first enable reading of the Full
"ASCII" character set under the
Code 39 configuration.
The programming procedure is then
as follows:
• Scan "Program"
• Scan "Header" or "Trailer"
• Scan the desired characters in the ASCII
• Scan "Set"
• Scan "End"
Header
Set
Program
General Parameters
table (Ref:Appendix II)
Trailer
End
19