JARLTECH 2008 Operation Manual page 14

Quick Install Programming
UPC and EAN
Code 128
Standard
2 of 5
Interleaved
2 of 5
Code 93
Bar Code
Identifier
12
• All UPC and EAN formats enabled
• Addendum disabled
• UPC-A leading characters transmit-
ted
• UPC-A check digits transmitted
• UPC-E leading characters not
transmetted
• UPC-E check digits not transmitted
• EAN-8 and EAN-13 check digits
transmitted
• No forced conversion of UPC-E to
UPC-A
• FNC 2 concatenation disabled
• Check digit calculated but not
transmitted
• Fixed code length of 10 digits
• Start/Stop characters (2 bars)
transmitted
• Check digit disabled
• Fixed code length of 10 digits
• Check digit disabled
• Enabled
• Transmission disabled
• If enabled, pre-set bar code
identifiers are as follows:
UPC-E: E
UPC-A: E
EAN-13: F
EAN-8: FF
Standard 2 of 5: H
Interleaved 2 of 5: I
Codabar: N
Code 39: M
Code 128: K
Code 93: L