Installing Rs232 Interface Ccd Scanner - JARLTECH 2008 Operation Manual

Installing RS232 Interface CCD Scanner

Step 4: Connect to your computer
Step 5: Turn on your computer
8
Connect the 9-pin female connector
(DB9F with DC jack) to the male
equivalent (DB9M) port on your
computer . Provide power to the DC
jack on the DB9F connector by
using an external adapter (see
Specifications in Appendix I).
Review the installation diagram on
the following page.
Your computer should boot up
normally. The scanner should
activate with a beep indicating a
successful installation.