Repotec RP-G3800UC User Manual

8 port gigabit switch

Advertisement

8 Port Gigabit Switch
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RP-G3800UC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Repotec RP-G3800UC

  • Page 1 8 Port Gigabit Switch User Manual...
  • Page 2: Copyright Statement

    Copyright statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording, without the prior writing of the publisher. Package Contents 8 Port Gigabit Switch Power Adapter This Manual Make sure that the packets contains above items.
  • Page 3 1. Introduction Thank you for choosing the 8port Giga Switch. 1.1. Overview of the switch The 8 Port 10/100/1000 Gigabit Switch provides non-blocking, wire speed switching for your 10, 100, and 1000 megabit network clients. Drop this switch in place of your current workgroup hub or switch, and you can upgrade your high-requirement workstations to full Gigabit speeds as necessary, while continuing to service other clients at their current speeds.
  • Page 4: Panel Layout

    1.3. Panel Layout 1.3.1. The Front Panel Figure- 1 8 Port Giga Switch Front Panel The Switch’s LEDs are located on the front panel of the Switch. LED Description Status Description The PWR led will light up when the Switch is powered on The LED will light up when there is a connection made through its corresponding...
  • Page 5: Install Switch

    2. Install Switch The site where you place the Switch may greatly affect its performance. When installing, take the following into your consideration. Follow the guidelines below to install the Switch. Install the Switch in a fairly cool and dry place. See the Technical Specifications for the acceptable temperature and humidity operating ranges.
  • Page 6: Appendix A Specifications

    APPENDIX A Specifications 10BASE-T specifications of the IEEE802.3 Standards 100BASE-TX specifications of the IEEE802.3u 1000BASE-T specifications of the IEEE802.3ab 8-10/100/1000Mbps RJ-45 switching ports Interface 1-Power 10Mbps: Full/Half duplex NWay Protocol 100Mbps: Full/Half duplex Support 1000Mbps: Full duplex only PWR: Green LED indicators 1-8: Green Buffer Memory...

Table of Contents