Electrolux EDW 1003 Service Manual page 22

6.3. Input philosophy: Program selection
1.
LD1 LD2 LD3 LD4 LD5 LD6
S1 S2 S3 S4 S5 S6
LD1
LD2 LD3 LD4 LD5 LD6
2.
LD3
3.
S3
LD3
4.
LD7 LD10
LD8 LD11
1. Appliance in switched-off condition
LD9 LD12
S0
2. Switch on appliance with ON/OFF key S0 -- "prestart" mode
S0
Selection of a start time possible
(see description page B 4 / "Input philosophy start-time preselection")
3. Select program by pressing the corresponding key.
Selection of a start time possible
(see description page B 4 / "Input philosophy start-time preselection")
Tür schließen
4. Program starts only when the door has been closed.
Up to this moment it is possible to alter or additionally select an option at any time.
When the door has been closed, the program will start automatically.
Ä Appliance is in the prestart mode
Ä All LEDs of the program keys and the "SZV" (start-time preselection) key are lit, the keys can be
selected.
Ä Corresponding program LED is lit.
Within 3 seconds it is possible to alter or additionally select an option.
Ä Corresponding program LED is lit.
22
EDW 1003 / VGA
LD1 LD2 LD3 LD4 LD5 LD6
LD7 LD10
LD8 LD11
LD9 LD12
S1 S2 S3 S4 S5 S6 S0