Lenovo 3000 Y410 User Manual page 58

Lenovo 3000Y410 UG.book Page 50 Friday, September 14, 2007 1:37 PM
Replacing Memory
9. Make sure that the memory module is firmly fixed in the slot and does
not move easily.
10. Reinstall the cover of the memory slot by inserting the tabs into the slots
first a, and closing the cover b. Then tighten the two screws c.
Attention: When you have added the SO-DIMM, do not use your computer
11. Reinstall the battery.
12. Turn the computer over again, and reconnect the ac adapter and cables
to the computer.
If you want to replace a new SO-DIMM, remove the origin SO-DIMM by
releasing the two latches on both edges of the socket at the same time, pull
out the SO-DIMM from the socket, and then install the new SO-DIMM
follow the steps above.
Attention: If only one SO-DIMM is installed, plug it into the SO-DIMM
To make sure that the SO-DIMM is installed correctly, do as follows:
1. Turn the computer on.
2. While the initial screen is displayed, press F2. The BIOS Utility screen
opens. The Total Memory item on the Main menu shows the amount of
memory you can utilize.
50
Lenovo 3000 Y410 User Guide
until you have closed the memory slot cover. Never use the
computer with the cover open.
socket which is closer to the mainboard.