Lenovo 3000 Y410 User Manual page 20

Lenovo 3000Y410 UG.book Page 12 Friday, September 14, 2007 1:37 PM
Getting Started
f Microphone (built-in)
The built-in microphone can be used for video conferencing, voice
narration, or simple audio recordings.
g Keyboard
The keyboard provides full-sized keys with comfortable travel. For
details on "Function Key Combinations", see page 23.
h Battery pack
The battery pack provides power for the computer when no AC
power source is available. If the AC adapter is connected to the
computer, the battery pack is automatically charged. For details on
"Learn How to Achieve All Day Computing", see page 30.
i Power button
Use the Power button to turn on the computer. To turn off your
computer, use the Start menu shutdown options. The Power button
also can be programmed to shut down the computer or put it into
sleep or hibernation.
If your computer stops responding, and you cannot turn it off, press
and hold the Power button for 4 seconds or more. If the system is still
not reset, remove the AC adapter and the battery.
j Mute button
Press this button to turn on or off the sound.
k Custom button
With the preinstalled software, once you press the button, a dialog
window appears to allow you to define the button with the
applications listed, so that you can recall the application instantly by
pressing this custom button.
Note: You need to install the driver of EnergyCut to realize this
l Novo button
This button functions as a reset button; use with caution. Press the
Novo button to enter the main interface of OneKey Recovery while the
power is off. You can use OneKey Recovery to restore the primary
hard disk partition (usually drive C) back to the factory default
configuration, including the operating system and the software on it.
Attention: Once done, the system can no longer return to its previous
For details, see "OneKey Recovery4.65 User Guide".
12
Lenovo 3000 Y410 User Guide
function. See page 29.
Once Easycapture is installed, this button is customized with
Easycapture automatically.
state. All data on the primary hard disk partition (usually
drive C) will subsequently be lost. So make sure all
important files on the primary hard disk partition have
been backed up onto another hard disk or USB hard disk
drive before this operation.