Rear Panel And Side Panel - SAGEMCOM F@ST 4320 User Manual

Indicator Color Status
Blink
Off
On
Green
Internet Blink
Off
Red On
3.1.2

Rear Panel and Side Panel

Figure 2 Rear panel
The following table describes the interfaces and the buttons.
Interface
RJ-11 port. Connect the router to DSL connector or splitter through
DSL
telephone cable.
RJ-45 port, for connecting the router to a PC or another network
LAN 4~1
device.
WAN For connecting Ethernet cable to provide Ethernet uplink.
Press the button for at least 1 second and then release it. System
Reset
restores the factory default settings.
User Manual
Description
The DSL line is training.
Device is powered off.
Internet is synchronized successfully in the route
mode.
Internet data is being transmitted.
Ethernet interface is disconnected.
Authentication has failed.
Description
6