Hands-Free Calling Voice Commands; Advisor Record Feature; How To Record; How To Recall Recorded Information - OnStar FMV Owner's Manual

Hands-Free Calling
• "Delete" – to delete a name tag. The system will ask for the name tag to be deleted.
• "Delete All Name Tags" – to delete every name tag stored, including Turn-by-Turn
name tags.
• "Cancel" – to return to the "OnStar ready" prompt or exit Hands-Free Calling.
• "Go Back" – to go back to the previous step.
• "Minutes" – to determine minute status, number of minutes available or to add minutes.
• "Verify or Add" – to verify the number of minutes available or to add more minutes
(purchase minutes automatically).
• "Goodbye" – to exit Hands-Free Calling.

Advisor Record Feature

Hands-Free Calling instructions, driving directions or information given during a call
with an OnStar Advisor can be recorded and the stored information can be played back
later.

How to record

1. During an OnStar call, push the
2. To stop recording, push the
recording).

How to recall recorded information

1. Push the
tone, say "Advisor playback."
2. The recorded information will play.
3. To pause the playback, push the
4. To continue, push the
"Please say play or resume."
5. Say "Resume" to continue playback from where the recorded information was
16
previously stopped. Say "Play" to start at the beginning.

Hands-Free Calling voice commands

Available voice commands include:
• "Yes. No. OK." – to respond to the system's request for
a "Yes," or "No" response. If the system has trouble
recognizing "Yes," the command "OK" can also be used.
• "My Number" – to hear the vehicle's number.
• "Dial" (or "Dial Number") – to dial numbers.
• "Call" (or "Call <name tag>") – to speed-dial using
stored name tags.
• "Store" – to store numbers for speed-dialing.
• "Store Last Number" – to store the last dialed number.
• "Redial" – to dial the last called number.
• "Directory" – to play all the stored name tags.
• "Help" (or "OnStar Help") – to hear a list of all
commands.
button. The system will beep (starts recording).
button again. The system will beep again (ends
button. When the system responds with "OnStar ready" and the talk-
button and say, "Advisor playback." OnStar will respond,
button again.