Removing The Microprocessor 2 Air Baffle - Lenovo THINKSERVER 3797 Hardware Maintenance Manual

Removing the microprocessor 2 air baffle

When you work with some optional devices, you must first remove the
microprocessor 2 air baffle to access certain components. The following illustration
shows how to remove the microprocessor 2 air baffle.
To remove the microprocessor 2 air baffle, complete the following steps:
1. Read the safety information that begins on page 3.
2. Turn off the server and peripheral devices and disconnect all power cords and
3. Remove the cover.
4. Remove PCI riser-card assembly 2 (see "Removing a PCI riser-card assembly"
5. Grasp the top of the air baffle and lift the air baffle out of the server.
1
Hole
2
Pin
3
Microprocessor 2 air baffle
4
Tab
5
PCI riser-card assembly 2
external cables (see "Turning off the server" on page 53).
on page 167).
Attention: For proper cooling and airflow, replace all air baffles before you
turn on the server. Operating the server with any air baffle removed might
damage server components.
Chapter 6. Removing and installing FRUs
175